SmokeGENIE Tutorial

Download the multilingual SmokeGENIE user manual.
(CN, CS, DA-DK, EN, FR, DE, IT, JP, NO, PL, ES, SV)

BASIC TUTORIAL

 

    MAGIC REMOTE

    DEFAULT REMOTE SETTINGS

    ADVANCED REMOTE FUNCTIONS


     

    SETUP

    The SmokeGENIE is designed to be easy to use with minimal maintenance. With a simple 3-step setup, it will be ready to serve you for a long time.

    1. Install Chamber - 
    Screw the Chamber onto the top of the SmokeGENIE main unit.

    2. Refill cloud formula –
    Lift the Silicone cap at the top of the Smoke Chamber and fill it with the "loud formula" Fog Liquid included with the package.
     
    3. Insert the Batteries –
    - 2x FLAT TOP 18650s for the SmokeGENIE
    - 1x ""3A 12V""battery for remote.
    SEE BATTERY GUIDE HERE
    Now you are all set!




    NOTE: 
    The Chamber may appear to have moisture or residue upon receipt. Please note that it is completely normal and is there to protect the Chamber. To protect the fluid-guiding material from deformation and erosion during transportation and storage, we have filled the Chamber with 1 mL of Cloud formula before shipping. The moisture or residue is likely a result of temperature and pressure changes during transportation.

     

    Back to Top


    INTERFACE & RECOMMENDED SETTINGS

    1. Turn on the unit –

    Press the RED BUTTON once to check the battery, then 3 more times to switch the machine ON. You can press the same button 3 times to power off.
     
    2. Adjust the power and wind levels using the toggle buttons.
    (SEE RECOMMENDED SETTINGS HERE)
     
    3. Press the SILVER BUTTON on SmokeGENIE to create smoke.
    NOTE:120s continuous spray limit - For safety, the machine will lock down after 120 seconds of continuous spray. Please check the tutorial code at the top of this page for information on how to unlock this limit.


    Auto-Power off - The Screen will turn off after 30 seconds, and the
    machine will turn off if left idle for 120 minutes.

      

    Back to Top

    REPLACE THE CHAMBER

     

    Back to Top

     

    FOG LIQUID REFILL

    1. The liquid level is visible at all times when looking through the heat shield. Refill whenever the liquid level drops below 1/3.
     
    2. Lift the silicone cap on top of the smoke chamber and refill it using the cloud formula supplied with the package.
     
    3. If you have leftover liquid after your session, unscrew the Chamber from the SmokeGenie and store the Chamber (with liquid) inside the air-tight capsule. The Chamber will stay in good condition if the capsule is properly sealed from atmospheric air.

    WARNING: 
    DO NOT use any third-party fog liquids on the SmokeGENIE.

    The PMI CLOUD FORMULA is designed to optimize the mmachine'sperformance. Due to the unique technology of our Chamber, other fog formulas will NOT WORK and may cause undesired effects. We are NOT liable for any harm or damage caused by the use of third-party fog liquids on the SmokeGENIE.
     

    PRO MODE

     

    Back to Top

    STORAGE

     

    Back to Top

    TRIDENT